This 50 amp remote module is designed to manage appliance loads connected to it based on a user defined priority setting. The device will only work when installed in conjunction with a Symphony II Transfer Switch. The device controls 120v or 240v, single or double pole, AC loads up to 50 amperes. The 50 amp relay state is normally open. The remote module is housed in a NEMA 4 enclosure suitable for indoor and outdoor installations and is hardwired in series to the managed devices using standard workmanship techniques and in compliance with applicable codes.
-
(BUILT PRIOR TO 2013) Synthetic Maintenance Kit for 12-18 kW Generac Generator (Built prior to 2013) 0J57670SSM This kit is used on generator models: 043900, 0046920, 0052491, 0053830, 0055230, 0057440, 0058860,0043901, 0046921, 0052500, 0053840, 0055231, 0057450, 0043902, 0046922, 0052501, 0053950, 0055240, 0057590, 0058930, 043903, 0047590, 0052530, 0053951, 0055241, 0057600, 0058940, 0044560, 0047591, 0052531, 0054090, 0055250, 0057660, 0058950, 0044561, 0047592, 0052540, 0054160, 0055251, 0057690, 0058960, 0044562, 0047600, 0052541, 0054170, 0055300, 0058070, 0058990, 0044563, 0047601, 0052550, 0054180, 0055310, 0058130, 0059000, 0046660, 0047602, 0052551, 0054740, 0055320, 0058200, 0059010, 0046661, 0050110, 0052820, 0054750, 0055330, 0058210, 0059150, 0046740, 0052420, 0052821, 0054960, 0055360, 0058720, 0059160, 0046741, 0052421, 0052830, 0055030, 0055370, 0058730, 0060520, 0046742, 0052430, 0052831, 0055040, 0055380, 0058740, 0060530, 0046750, 0052431, 0052840, 0055050, 0055390, 0058750, 0058370, 0046751, 0052440, 0052841, 0055060, 0056120, 0058751, 0058880, 0046752, 0052441, 0053810, 0055220, 0056130, 0058840, 0046753, 0052490, 0053820, 0055221, 0056140, 0058850, 0052891, 0052901, 0052911, 0052921, 0052961, 0052971, 0052991, 0053290, 0053291, 0053300, 0053301, 0053311, 0054230, 0055440, 0055450, 0055460, 0055520, 0055530, 0055540, 0055600, 0055610, 0055620, 0055890, 0055900, 0055910, 0055920, 0057720, 0057730, 0057740, 0058340, 0058350, 0058380, 0058721, 0058731, 0058841, 0058851, 0058861, 0058931, 0058941, 0059040, 0059050, 0059060, 0059100, 0059101, 0059110, 0059111, 0059120, 0059121, 0059151, 0059161, 0059210, 0059211, 0059220, 0059221, 0059230, 0059231, 0060330, 0060331, 0060521, 0060531, 0060540, 0060541, 0060621, 0060631 -
Cummins Onan P4500i - Free Shipping
- 4,500 Starting Watts/3,700 Running Watts
- Warranty: 3-Years
- Push Button & Remote Start
- Quiet Operation, 52dBa
- 30 Amp TT-30R RV Outletr
- 2 USB ports - Safe Power for Sensitive Electronics
- Parallel Capable
- Gas Powered
-
This low voltage remote module is designed to manage air conditioner, heat pump or low voltage contractor-controlled appliances/loads based on a user defined priority setting. The device will only work when installed in conjunction with a Symphony II Transfer Switch. The low voltage relay contacts are normally open. The remote module is housed in a NEMA 4 enclosure suitable for indoor and outdoor installations and is hardwired to 120vac power and the managed devices using standard workmanship techniques and in compliance with applicable codes. -
Generac 6485 Maintenance Kit for 20kW-22kW Standby Generators with 999cc Engine for 2013 and later HSB models.
-
Item is currently on backorder, Current lead time of 14-16 weeks. Reserve one today. 200 amp Liquid Cooled Symphony® II Power Management Transfer Switch, Single Phase, NEMA 3R, SED Includes 6 year warranty. -
-
Maintenance Kit for 10kW Generac Generator Built prior to 2013 - 0J576600SM This maintenance kit is for the 10kW series Generac, Honeywell, Siemens, & Eaton residential automatic home-standby generator. This kit used on generator models 0052410, 0052411, 0052419, 0052480, 0052481, 0052520, 005252, 0052810, 0052811, 0054730, 0055020, 0055200, 0055201, 0055280, 0056110, 0058260, 0058330, 0058710, 0058711, 0058770, 0058831, 0058920, 0058921, 0058980, 0059140, 0059141, 0059180, 0060510, 0060511, 0052521, 0052881, 0052950, 0052951, 0053280, 0053281, 0055420, 0055500, 0055580, 0057710, 0058830, 0058832, 0059030, 0059090, 0059091, 0059200, 0059201, 0060320, 0060321, 0060611, Your generator model number is located inside the generator enclosure on the divider plate near the control panel.
-
-
Cummins has set the standard for quiet, reliable and innovative RV power for over 80 years. • Quietest in its class. • Exceptionally low vibration levels. • Integrated design with enclosed muffler for easy installation. • Self-diagnostic capability to simplify troubleshooting. • Runs one or two air conditioners with power to spare. • Digital voltage regulation for stability as appliance loads change. • 3-year limited warranty, lifetime drive warranty. • Gasoline or LP fueled. Specifications Specifications Watts 5500 Amps 45.8 Volts 120 Hz 60 Fuel LP Vapor Breaker 30A & 20A -
This low voltage remote module is designed to manage air conditioner, heat pump or low voltage contractor-controlled appliances/loads based on a user defined priority setting. The device will only work when installed in conjunction with a Symphony II Transfer Switch. The low voltage relay contacts are normally open. The remote module is housed in a NEMA 4 enclosure suitable for indoor and outdoor installations and is hardwired to 120vac power and the managed devices using standard workmanship techniques and in compliance with applicable codes. -
200 amp Symphony II power management transfer switch, single phase, NEMA 3R, SED 071068 Includes 6 year warranty. -
Out of stock
Briggs & Stratton 6036 15-20kW Standby Generator Maintenance Kit Part # 6036 -
Oil warmer for 15-20kW Generators Part # 6254 includes oil warmer for Briggs & Stratton generators. -
10-20kW 240 Volt Battery Warmer Part # 6182 includes 10-20kW 240 volt battery warmer for Briggs & Stratton backup generators. -
Cummins has set the standard for quiet, reliable and innovative RV power for over 80 years. • Quietest in its class. • Exceptionally low vibration levels. • Integrated design with enclosed muffler for easy installation. • Self-diagnostic capability to simplify troubleshooting. • Runs one or two air conditioners with power to spare. • Digital voltage regulation for stability as appliance loads change. • 3-year limited warranty, lifetime drive warranty. • Gasoline or LP fueled. Specifications Specifications Watts 5500 Amps 45.8 Volts 120 Hz 60 Fuel LP Vapor Breaker 30A & 30A
-
Kit for 7kW Core Power Generac Generator 0J578300SM This maintenance kit is for the 7kW Generac Core Power Generator only. Generator models: 0058370, 0058880. This maintenance kit offers all the items necessary to perform complete maintenance on your Generac automatic home-standby generator. Generac recommends performing maintenance once per year - more frequently if running in a dusty environment. Your generator model number is located inside the generator enclosure on the divider plate near the control panel. -
Cummins Onan P9500df - Free Shipping
- 9,500 Starting Watts/7,500 Running Watts
- Warranty: 3-Years
- Push Button & Remote Start
- 13 HP Engine
- Cummins Smart Transfer Switch Ready
- Overload Protection
- 120/240 AC Voltage
- Gas or Propane Powered
-
Generac 5663 Maintenance Kit for 11kW Standby Generators 530cc Engine for HSB models prior to 2013.
-
Generac 5664 Maintenance Kit for 13kW-17kW Standby Generators 990cc Engine for HSB models prior to 2013.
-
Generac 5665 Maintenance Kit for 20kW Standby Generators 999cc Engine for HSB models prior to 2013.
-
Specifications
- Model Number: 076130
- Rated Watts: 35,000
- Running Watts: 35,000
- RPM: 1800
- Voltage (V): 120/240V AC, Single Phase, 1.0 pf
- Cooling System: Liquid
- Rated Amps: 146
- Fuel Consumption (LP)**: 50% Load = 3.1 gal/hr
- Fuel Consumption (NG)**: 50% Load = 458 ft3 /hr
-
100 amp Symphony II power management transfer switch, single phase, NEMA 3R, SED 071071 Includes 6 year warranty. -
100 amp transfer switch, single phase, NEMA 3R, ACCM 071055 Includes 5 year warranty. -
Briggs & Stratton 6035 10-12kW Standby Generator Maintenance Kit Part # 6035
